User manual

URDR0001 - User manual - 49
6. s. m. 6 Samples Mean
7. s. m. 7 Samples Mean
8. s . m. 8 Samples Mean
9. s . m . 9 Samples Mean
10.s . m. 10 Samples Mean (Maximum slow down of display update)
n u LL Disabled without pitchfork
f. o . 2 First order lter
57 tune Tune
Tuning type selection. (See paragraph 7.2)
di s . Disabled (Default)
Auto Automatic (P.I.D. parameters are calculated at activation
and at change of set point)
Man. Manual (launch by keyboard or digital IN)
sYn c. Synchronized (see word modbus 1025)
58 s.d.tu. Setpoint Deviation Tune
Select the deviation from the command setpoint for the threshold
used by autotuning to calculate the P.I.D. parameters
0-5000 [digit
10
] (degrees.tenths for temperature sensors). Default: 10.
59 op.mo. Operating Mode
Select operating mode. (See paragraph 7.12)
co n t. Controller (Default)
p r. cY . Pre-programmed cycle (See paragraph 7.7)
2t.s. Setpoint change by digital input
2t.s .i . Setpoint change by digital input with impulse command
3 t. s .i . 3 sets change by digital input with impulse command