User manual

URDR0001 - User manual - 51
62 Grad. Gradient
Rising gradient for Soft-Start or pre-programmed cycle
0 Disabled
1-9999 [Digit/hour
8
] (degrees/hour with display of tenth for tempe-
rature sensor).
Default: 0.
63 ma.ti. Maintenance Time
Maintenance time for pre-programmed cycle
00.00-24.00 hh.mm. Default: 00.00
64 u.m.c.p. User Menu Cycle Programmed
Allows to modify rising gradient and maintenance time, from user
menu, when pre-programmed cycle is operating
di s . Disabled (Default)
Grad. Gradient
m a . ti . Maintenance time
ALL Both gradient and maintenance time
65 ui . tY. Visualization Type
Select visualization for display 1 and 2
1. p.2.s . 1 Process, 2 Setpoint (Default)
1. p.2.H. 1 Process, 2 Hide after 3 sec.
1.s.2.P. 1 Setpoint, 2 Process
1.s.2.H. 1 Setpoint, 2 Hide after 3 sec.
1.p.2.a. 1 Process, 2 Ampere (T.A. input)
1. p2.0 1 Process, 2 Command output percentage
8
Display of decimal point depends on setting of parameter sen. and parameter d. p.