Datasheet

Order information:
Pulses per revolution:
4, 9, 10, 15, 20, 25, 28, 30, 36, 40, 50, 60, 90, 100, 120,
125, 128, 150, 160, 180, 200, 235, 250, 300, 314, 318,
360, 400, 500, 600, 625, 635, 720, 900, 1000, 1024,
1080, 1200, 1250, 1500
Output circuit:
G24=10-30VDC
Only at K2, L2:
G05 = 5 VDC
I24 = 10 - 30 VDC (inv.) I05 = 5 VDC (inv.)
Electrical connections:
Cable
K1 = radial, 2 m, shield not connected (Protecting rate IP50)
K2 = axial, 2 m, shield connected to encoder housing
L2 = axial, 2 m, shield connected to encoder housing
Connector: Sensor-connector:
S2 = 7-pin axial SB4, SB5, SB8, SB12 =
4-pin, 5-pin, 8-pin, 12-pin axial
Example WDG 40 A - 500 - ABN - G24 - K2
Your encoder WDG 40 A - - - -
Channels: A, AB, ABN
www.wachendorff.de
Wachendorff data sheet Encoder WDG 40A - 5 of 5
Encoder WDG 40 A
Empty = without option
Low-friction bearings = AAC
Shaft sealed to IP 67 = AAO
Cable length = in decimeters
Wachendorff Automation GmbH & Co. KG
Industriestrasse 7
D-65366 Geisenheim
Tel.: [phone] / 99 65 - 25
Fax: [phone] / 99 65 - 70
www.wachendorff.de