Product Manual

4 Security
100_0202_si_0006.fm 13
4.7.2 Operational safety
 When operating the machine, make sure that no gas, water, or electric lines are damaged.
 The machine must not be operated in tunnels or enclosed spaces.
 Pay maximum attention near drops or slopes. Risk of crashing!
 The operator must not leave the operator location behind the center pole while it is in operation.
 Do not leave the machine unattended. Risk of injury!
 Delimit spacious workspace and restrict access to unauthorized individuals. Risk of injury!
 Machine operators must ensure that people in the working area keep a minimum distance of 2 meters
from the running machine.
 Do not use any starting aid sprays. These can cause misfires as well as engine damage. Fire hazard!
 When operating the machine on sloped surfaces, always approach slopes from below and always
stay above the machine on a slope. The machine could slip or tip over.
 Do not exceed max. allowable slanting position of the machine – possible failure of the engine
lubrication, see chapter Technical Data.
 Only Wacker Neuson use starter batteries. These are vibration proof and therefore suitable for the
high vibration exposure.
4.7.3 Minimum safety distances
Compaction work near buildings can cause damage to buildings. Therefore, all potential effects and
vibrations on surrounding buildings must be checked in advance.
The relevant rules and regulations for measuring, evaluating and reducing vibration emissions -
especially the DIN 4150-3 - must be considered.
Wacker Neuson assumes no liability for any damage to buildings.