Product Manual

4 Security
100_0202_si_0006.fm 15
4.11 Maintenance
The following notes must be observed:
 This machine may not be maintained, repaired, adjusted or cleaned while switched on.
 Adhere to maintenance intervals.
 After each maintenance or repair, the safety devices on this machine must be reattached.
 Observe the maintenance schedule. Non-listed work must be taken over by the service department
of the Wacker Neuson contact partner.
 Immediately replace worn or damaged machine parts. Only use spare parts from Wacker Neuson.
 Keep the machine clean.
 Missing, damaged, or illegible safety warning labels should be replaced immediately. Safety stickers
contain important information for the protection of the operator.
 Maintenance jobs must be performed in a clean and dry vicinity (e.g. workshop).
4.12 Personal Protective Equipment
NOTICE
To prevent personal injury when handling this machine, personal protective equipment
must be worn when working on or around this machine.
Pictogram Significance Description
Wear safety shoes! Safety shoes provide protection from bruises, falling
objects, and slipping.
Wear protective gloves! Protective gloves provide protection from abrasion,
cuts, punctures, and hot surfaces.
Wear ear protection! Ear protection provides protection from permanent
hearing impairment.
NOTICE
With this machine, the permissible, country-specific noise limit (personal rating level) may
be exceeded. Therefore, ear protection must be worn. For exact values regarding noise
emissions, refer to Technical Data section.
Work particularly cautiously and pay attention when wearing ear protection, as your ability
to hear noises, such as screams or signal tones, is restricted.
Wacker Neuson recommends always wearing ear protection.