Operator`s manual

3 Safety
13
Breathing protection
If a lot of dust is produced when cutting, always wear suitable breathing
protection.
Use the water supply.
Provision of fire extinguishers
Ensure that a fire extinguisher is always to hand on the worksite.
Do not exceed the daily usage limit
The machine generates noise.
Observe the regulations which apply in your country and guidelines concerning
the maximum daily service life of the machine.
Always wear the prescribed safety clothing.
Information about the noise levels produced by the machine can be found in the
Technical Data chapter.
3.4 Transport
Switching off the machine
Before you transport the machine, it must be switched off, and the engine must
be given sufficient time to cool down.
Emptying the tank
Wacker Neuson recommends emptying the fuel tank before transport. Fuel could
run out, e.g. if the machine is tilted.
Observe the national safety guidelines and the hazardous materials regulations
that apply to the respective means of transportation.