Operator`s manual

3 Safety
16
Vertical stability
Always ensure that the machine is vertically stable and cannot tip over, roll or
slide away.
Proper operator position
Do not leave the proper operator position while operating the machine.
The intended operator position is at the controls behind the machine.
Caution with hot parts
Do not touch the machine during or shortly after operation. Some parts can
become very hot and can cause severe burns.
Caution with movable parts
Keep your hands, feet and loose clothing away from moving or rotating machine
parts. Parts of your body being pulled in or crushed can cause serious injuries.
Caution with toxic materials
Some materials may contain toxic chemicals which are released during
demolition. Therefore personal protective equipment must be worn to prevent
inhalation of and skin contact with work dust.
No persons endangered
Be sure that no persons are endangered by flying or falling materials. Always
work very attentively, and anticipate potential hazards.
Make sure that people in the vicinity are at a sufficient distance from the
machine.
Do not use any starter sprays
Highly flammable starter sprays pose a fire hazard.
Do not use any starter sprays.
Starter sprays are highly flammable and can cause backfiring and engine
damage.
Switching off the machine
Switch off the engine in the following situations:
 Before breaks.
 If you are not using the machine.
Store the machine in such a way that it cannot tilt, fall or slip.