Operator`s manual

3 Safety
21
Do not touch a rotating cutting blade
Never touch a rotating cutting blade with your hand or any other body part.
Danger of severe injury.
Pay attention and exercise caution when working with ear protection
When wearing ear protection you must pay attention and exercise caution
because your hearing is limited, e.g. in case someone screams or a signal tone
sounds.
Danger of fire due to sparks
Danger of fire due to hot workpiece particles flung away from the work area.
 Do not work near flammable materials.
 Only wear clothing made of material that is not easily flammable.
Notes regarding cutting blades
 The cutting blade must be suitable for use with the cut-off saw.
 The cutting blade must be suitable for the material to be cut.
 The speed allowed for the cutting blade must be the same as or higher than
the maximum machine spindle speed.
 Mount the cutting blade such that its rotation direction is the same as that of
the machine.
 Only use cutting blades with permissible cutting blade diameters.
 When using cutting blades with a hole diameter greater than the machine
shaft, use the suitable adapter ring.
 Only use undamaged cutting blades.
 Ensure that you also follow the instructions of the cutting blade manufacturer.
 Do not use cutting blades that have fallen.
 Change the cutting blade only when the engine has been turned off.
 Always tighten the cutting blade with the specified torque.
 Test the new cutting blade for approx. 1 min at maximum speed (without
cutting).
 Only use cutting blades with use-by dates that have not expired.
 When storing cutting blades, always lay them flat in an area that is protected
from frost.