Operator`s manual

3 Safety
22
3.8 Maintenance
Maintenance work
Service and maintenance work must only be carried out to the extent described
in these operating instructions. All other procedures must be performed by your
Wacker Neuson representative.
For further information, refer to chapter Maintenance.
It is not permitted to tilt the machine for maintenance work.
Switching off the engine
Before carrying out care or maintenance work, switch off the engine and allow it
to cool down.
For gasoline powered engines, you must pull off the spark plug cap.
Checking the ignition system
Caution: the electronic ignition generates a very high voltage.
Disconnecting the battery
For machines with electric starter, you must disconnect the battery before
working on the electronic parts.
Working on the battery
Always take the following safety measures when working with the battery:
 No fire, sparks, or smoking while working with batteries.
 Batteries contain corrosive acid. Use acid-proof protective gloves and
protective goggles when working with batteries.
 Avoid short circuits due to improper connection or bypassing with tools.
 Disconnect the negative terminal first when disconnecting the battery.
 Connect the positive terminal first when connecting the battery.
 Re-fasten terminal covers after connecting the battery.