Operator`s manual

Operation
T01136GB.fm 35
3.3.2 To set the scale proceed as follows:
1. Push quick-lift lever (3) fully forwards.
2. Turn the cutting depth crank (5) until the cutting disc barely starts
touching the floor.
3. Loosen the screws (14) and move the arrow until it coincides with
the ”0” mark of the scale.
4. Retighten the screws (14).
3.4 Water tank
The floor saw features an integrated, removable water tank (15).
The filler opening (16) can be found at top left side.
The amount of water can be regulated or stopped (17).
To remove the water tank proceed as follows:
1. Empty the water tank completely if required. For this purpose open
the metering tap (17) completely.
2. Release the hose coupling (18) once the tank has been completely
drained.
3. Turn hand crank (5) to a horizontal position.
4. Apply the parking brake (6).
5. Pull the tank out by the recessed grip (20).