Operator`s manual

The licensed gas technician must use a manometer (to

properly adjust gas pressure) and an electronic combustion

analyzer (to properly adjust burner air intake and verify that

proper combustion parameters have been achieved). The

licensed gas technician must supply all fuel lines, fittings,

regulators, etc. necessary to connect the Pureheat

NG/LP

burner to the fuel source at the correct pressure and flow.

FAILURE TO HEED THIS WARNING MAY RESULT IN

AN EXPLOSION AND/OR FIRE CAUSING

PROPERTY DAMAGE, PERSONAL INJURY OR DEATH.

WARNING

LICENSED GAS TECHNICIAN REQUIRED.

NG/LP BURNER SETUP AND INSTALLATION, FUEL

SUPPLY CONNECTION, TEST FIRING AND BURNER

ADJUSTMENT MUST

BE PERFORMED BY A LICENSED

PROFESSIONAL GAS TECHNICIAN AND MUST CONFORM

TO THE REQUIREMENTS OF ALL RELEVANT LOCAL,

STATE, PROVINCIAL AND FEDERAL AUTHORITIES.

Burner setup and installation, fuel supply connection, test-

firing and burner adjustment must be performed by a

licensed

professional and must conform to the

requirements of local, state and federal authorities. In the

Commonwealth of Massachusetts, gas piping shall be

installed by a licensed plumber or gas fitter.