Operator`s manual

G 25 Safety Information
wc_si000295gb.fm 11
• Electric shock and arc flash
• Personal injury from improper lifting the trailer tongue
• Typical hazards related to towing a trailer on roads and highways
To protect yourself and others, make sure you thoroughly read and
understand the safety information presented in this manual before
operating the machine.
Electrocution hazard!
Electrocution or severe electrical shock hazards are present
throughout the generator any time the engine is running! Read all
safety notes contained in this section before operating or servicing this
equipment.
No one except a trained electrician, familiar with this equipment,
should attempt repairs to the generator! Test procedures which require
that the generator be running must be performed using extreme
caution.
This machine is built with user safety in mind; however, like any
electrical device it can present serious hazards if improperly operated
and serviced. Follow instructions carefully! Should questions arise
during operation or service of this equipment, contact Wacker Neuson
Corporation.
1.3 Safety Guidelines for Operating the Machine
Familiarity and proper training are required for the safe operation of
the machine. Machines operated improperly or by untrained
personnel can be dangerous. Read the operating instructions
contained in both this manual and the engine manual and familiarize
yourself with the location and proper use of all controls. Inexperienced
operators should receive instruction from someone familiar with the
machine before being allowed to operate it.
Operator qualifications
Only trained personnel are permitted to start, operate, and shut down
the machine. They also must meet the following qualifications:
• have received instruction on how to properly use the machine
• are familiar with required safety devices
The machine must not be accessed or operated by:
•children
• people impaired by alcohol or drugs
Personal Protective Equipment (PPE)
Wear the following Personal Protective Equipment (PPE) while
operating this machine:
WARNIN
G
WARNING