User manual

1A-14

1A OPERATION G110/G125

1.10 Generator Monitoring

Generator information is displayed on the top line of the

LCD panel and is scrolled continuously while the genera-

tor is operating, to show the voltage, amperage and

frequency of each phase.

Note:

To prevent the display from scrolling, press the

ENG HRS switch down.

Volts “V”- Displays the AC output voltage being pro-

duced by the generator.

Phase “Ø” - Indicates which phase is currently being

displayed.

Amps “A” - Displays the AC output amperage produced

by the generator. If the generator is operating at no-load,

output amperage will display a 0.

Hertz “Hz” - Displays output frequency. This gauge

should read approximately 61.5 Hz under a no-load

condition. If the frequency is too high, check the engine

rpm.

1026SD65

208 1 24 61.5

78 85% 175 14.3

(SAMPLE DISPLAY WITH ENGINE RUNNING)

(SAMPLE DISPLAY IN “AUTO” MODE)

UNIT IN AUTO

Ø 100% 85 13.2