User manual

2A-2
2A MAINTENANCE G110/G125
2.1 Engine Maintenance
2.2 New Machines
1. Run generator at least 60–100% of continuous load - first 100 hours.
2. Change engine oil and replace oil filter - first 100 hours.
The Periodic Maintenance Schedule below lists basic maintenance intervals for the engine and generator. For
detailed maintenance procedures on the engine, refer to the engine Operator's Manual.
2.3 Periodic Maintenance Schedule
metIyliaD
.srH05
2ro
skeew
052
.srH
006
ro.srH
.oM21
0021
ro.srH
.oM42
0002
.srH
rehtO
leveltnaloocdnalioenignekcehC
•
*rotacidninoitcirtser&evlavrenaelctsudriakcehC
•
noitcepsnidnuoraklawlausiV
•
retlifleufkcehC
•
yrettabehtecivreS
•
**retliflioecalperdnalioenigneegnahC
•
ebuttnevesacknarcnaelC
•
metsysdna,snoitcennoc,sesohekatniriakcehC
•
tnemeleretlifleufecalpeR
•
raewtlebdnarenoisnettlebcitamotuakcehC
•
metsysgniloockcehC
•
s'ACSdda&sisylananoitulostnaloocmrofreP
•
poordenignetsujdA
•
metsysgnilooctseterusserP
•
***metsysgniloochsulF
•
ecnaraelcevlavenignetsujdadnakcehC
•
ylhtnomtsaeltareliartnileveldiulfekarbkcehC
•
gniwoterofebstunguldnaraewdaert,noitalfnieritkcehC
•
selim0001yrevesbuhmurdesaerG
•
* Replace the air filter cartridge when yellow indicator of the Engine Air Filter Gauge reaches the red line.
** Change the oil after the first 100 hours, then every 250 hours.
*** If John Deere antifreeze is used, the flushing interval may be extended. See engine owner’s manual.