Instructions / Assembly

PG 2A Safety Information
wc_si000415gb.fm 13
1.3.6 Do not open pump housing cover while pump is operating, or start
pump with the cover off. The rotating impeller inside the pump can cut
or sever objects caught in it.
1.3.7 Do not block or restrict flow from inlet line or discharge line. Remove
kinks from discharge line before starting pump. Operation with a
blocked inlet line or discharge line can cause water inside pump to
overheat.
1.3.8 Read, understand, and follow procedures in the Operator’s Manual
before attempting to operate the machine.
1.3.9 Be sure operator is familiar with proper safety precautions and
operation techniques before using machine.
1.3.10 Be sure the machine is on a firm, level surface and will not tip, roll,
slide, or fall while operating.
1.3.11 Close fuel valve on engines equipped with one when machine is not
being operated.
1.3.12 Store the machine properly when it is not being used. The machine
should be stored in a clean, dry location out of the reach of children.