Instructions / Assembly

Maintenance PD 2A / PD 3A
34 wc_tx001332gb.fm
c. Soak the foam element in clean engine oil until saturated. Squeeze out
excess oil.
6. Reinstall the filter elements and air cleaner cover.
Note: In the interests of environmental protection, dispose of waste oil and soiled
rags in accordance with environmental protection legislation.
5.4 Greasing the Connecting Rod Bearing
When Grease the connecting rod bearing every 40 hours of operation or monthly.
Requirements  General automotive grease
 Machine shut down
Procedure Perform the procedure below to grease the connecting rod bearing.
1. Stop the engine.
2. Access the grease fitting of the connecting rod bearing through the access hole
(a).
3. Using a grease gun, pump grease into the fitting until new grease seeps out
between the bearing and the journal.