User's Manual

Contents
Index
Contents
44
Index
44
SETTING THE TIP AND ERASER FEEL, AND DOUBLE-CLICK DISTANCE
Select the P EN tab. To create broad brush strokes or to click with a light touch, use a soft tip setting. For
maximum control while drawing thin lines, use a firm tip setting. To erase with a broad stroke or to click with
a light touch, use a soft eraser setting. For maximum control while erasing, use a firm eraser setting.
When checked, an
audible “click”
sound will be heard
whenever a pen click
occurs and your
computer speakers
are turned on.
Adjusts the size of
the double-click area
and the double-click
speed. A larger
setting makes
double-clicking
easier.
Customizes the amount
of pressure needed to
click, draw, or ink.
Tips
:
Use a soft T
IP F EEL to reach the full pressure range with a lighter touch.
In some applications a soft pressure setting can make the pen overreact, causing any small press on the pen
to be magnified on the screen. If you experience this, try a firmer T
IP F EEL setting.
To make double-clicking easier, expand the tap area that accepts a double-click (the double-click distance).
A large double-click distance may cause a delay at the beginning of brush strokes in some drawing
applications. This may also cause a delay at the beginning of a drag action or inking stroke. If you notice such
effects, try setting a smaller double-click distance and using a pen button set to double-click (see using the
pen buttons). You can also set an ExpressKey to double-click.
Customizes the amount
of pressure needed to
erase. Available for
eraser-equipped pens.