User's Manual

10
Index
Contents
10
Index
Contents
ADJUSTING TIP FEEL AND DOUBLE-CLICK
To adjust the tip sensitivity of your pen, select the PEN tab.
Customizes the amount of
pressure needed to click, draw, or
ink. Drag the slider to a softer or
firmer setting.
To create broad brush strokes or to
click with a light touch, use a S
OFT
tip setting. For maximum control
while drawing thin lines, use a F
IRM
tip setting.
With your screen cursor positioned over
an empty area of the control panel,
press down on the pen display screen
with your pen tip to test the current tip
feel setting. Use the C
URRENT PRESSURE
bar to determine how hard you must
press on the pen to reach maximum
pressure.
Displays the tip F
EEL DETAILS dialog
box where you can further
customize the tip sensitivity.
Tips
:
• Use a soft T
IP FEEL for a wider range of pressure values with most pressure-sensitive applications.
• In some applications a soft pressure setting can make the pen overreact – any small press on the pen is
magnified on the screen. If you experience this, try a firmer T
IP FEEL setting.
• To make double-clicking easier, expand the tap area that accepts a double-click (the double-click distance).
• A large double-click distance may cause a delay at the beginning of your brush strokes in some drawing
applications. If you notice such effects, try setting a smaller double-click distance and using the side switch to
double-click. You can also set an ExpressKey to double-click.
Adjusts the size of the double-click
area. Drag the slider to
OFF if you do
not want double-click assist
.