User's Manual

12
Index
Contents
12
Index
Contents
CUSTOMIZING TOOL BUTTONS
Select the PEN tab to change the functions assigned to the side switches and tip of your pen.
Select the function to perform
when pressing the upper or lower
side switch.
When you bring the pen tip within
5 mm (0.20 inch) of the tablet
surface without touching the tablet
and press the upper or lower side
switch, the selected function
occurs.
Tip
: To make double-clicking easier,
set the side switch to double-click
automatically by selecting D
OUBLE
C
LICK.
Double-click here to change the function assigned to the pen tip.
• At least one tool button should be set to the C
LICK function.
• The tip must be set to C
LICK in order to draw in most graphics
applications.
You can change the S
IDE SWITCH
M
ODE to best fit the way you like to
use the pen when making right-clicks
or other click functions. To access
these settings, click on the control
panel O
PTIONS... button. Select:
•H
OVER CLICK to perform click
functions without touching the
pen tip to the pen display screen
surface.
•C
LICK & TAP to enable the precise
placement of click functions.
When selected, you must first
press the side switch then touch
the pen tip to the pen display
screen surface in order perform
the click function. This is the
default setting for Tablet PCs.
Hover click
Click tap