User's Manual
Table Of Contents
- Customizing
- Opening the control panel
- Control panel overview
- Calibrating the pen display
- Adjusting pitch and phase (VGA only)
- Customizing the pen
- Customizing pen display functions
- Button functions
- Using and customizing the Radial Menu
- Working with Display Toggle
- Working with multiple monitors
- Application-specific settings
- Working with multiple tools
- Changing the tablet mode
- Installing multiple tablets
- Managing preferences
- Using applications integrated for tablet control
- Importing expert settings
- Glossary
26
Index
Contents
26
Index
Contents
CHANGING THE TABLET MODE
Within the control panel’s TABLET list, double-click on the pen display icon to display the TABLET dialog box.
The T
ABLET mode settings apply to all tools and applications.
Note: This option may not be available for all pen display models.
INSTALLING MULTIPLE TABLETS
The TABLET list displays an icon for any supported pen display or tablet that has been detected on your
system, and allows you to select the pen display or tablet for which your changes will apply.
To add a new pen display or tablet
, connect it to your computer. The system will automatically find the pen
display or tablet and initialize it. An icon for the pen display or tablet will then appear in the control panel.
Important: When installing additional pen display units or tablets on Windows systems, please note that the
eraser function may not work in some applications when using the additional pen display unit(s) or tablet(s).
The eraser function will continue to work correctly using the first pen display or tablet that was added to the
control panel.
To remove one of multiple pen displays or tablets from the driver
, in the Wacom Tablet control panel select
the pen display or tablet to be deleted and click on the [ – ] button next to the T
ABLET list.
• A pen display or tablet cannot be deleted from the control panel list unless it is attached to the
computer.
• Note that you will need to restart your computer before you can again add the tablet to the driver.
If desired, enter a new name to be used for the pen
display icon.
S
TANDARD MODE is recommended for graphics
applications.
Choose R
ECOGNITION MODE for the maximum data rate.
Required by some handwriting recognition software.
Select a pen display or tablet icon for which
to customize tool and application settings.
• The control panel will not launch unless
a supported pen display or tablet is
connected to the computer.
• Settings can only be viewed or
changed for an attached pen display or
tablet.