User's Manual

8
Index
Contents
8
Index
Contents
ADJUSTING PITCH AND PHASE (VGA ONLY)
Some computers and video cards may not allow the auto-sync function to fully work when the interactive
pen display is first connected. If some portion of text appears blurred, use the pen display A
UTO ADJUST
option to automatically synchronize to the incoming signal. If the image is still blurred, adjust pitch and
phase. For optimum display quality, set your video card to the maximum (native) resolution that can be
used with your pen display. Set Cintiq in its working position, then follow the procedure below.
Note: Depending on your product configuration, “Pitch” may also be referred to as “Clock”.
1. Open the Wacom Tablet control panel.
If more than one pen display is installed
on your system, select the unit you are
working with from the T
ABLET list.
2. Select the C
ALIBRATE tab.
3. If you are working with multiple
displays, be sure the option
corresponding to the pen display is
selected in the M
ONITOR menu.
4. Click C
ALIBRATE... to activate the
calibration screen.
5. Using the pen display On Screen
Display (OSD) controls, open the OSD
menu and select the P
ITCH option.
Then adjust the pitch level so the
pattern of fine vertical stripes displays
evenly.
6. In the OSD menu, select the P
HASE
option. Adjust the phase level so the
adjustment pattern shows clearly.
7. After completing these adjustments,
press the pen display E
NTER and MENU
buttons to exit the OSD menu.
8. Click on the C
ANCEL button or press ESC
to exit the calibration screen.
Crosshairs
Adjustment pattern for pitch and phase (VGA only).