User Manual

IndexContents

Contents

Index

Contents

Index

ADJUSTING TIP FEEL AND DOUBLE-CLICK

To adjust the feel and sensitivity of your pen and eraser, select the PEN tab.

Tips

• Use a soft

TIP FEEL for a wider range of pressure values in most pressure-sensitive applications.

• In some applications a soft pressure setting can make the pen overreact so that slight pressure on the

pen will be magnified on the screen. If you experience this, try a firmer

TIP FEEL setting.

• A large double-click distance may cause a delay at the beginning of brush strokes in some drawing

applications. This may also cause a delay at the beginning of a drag action or inking stroke. If you

notice such effects, try setting a smaller double-click distance and using the side switch to double-

click. You can also set an ExpressKey to double-click.

TIP FEEL and ERASER FEEL customize the

amount of pressure needed to click, draw, ink,

or erase.

To create broad brush strokes or to click with a

light touch, use a S

OFT tip setting. For

maximum control while drawing thin lines, use

a F

IRM tip setting.

To set the double-click distance from the

tablet, use the Tip Double Click Distance

slider.

With your screen cursor positioned over an

empty area of the control panel, press down

on the tablet with the pen eraser. Use the

pressure bar to determine how hard you must

press on the eraser to reach maximum

pressure.

To set the functions for the eraser and side switch, select options from the dropdown menus beside the pen. The

selected function occurs when you bring the pen tip within 10 mm (0.4 inch) of the tablet surface without touching

the tablet and then press the upper or lower side switch.

Double-click on the pen tip to change the pen tip function. The tip must be set to C

LICK in order to draw in most

graphics applications.

At least one tool button should be set to the C

LICK function.

You can change how the side switch operates for right clicks or other click functions. See

Using the side switch.