User Manual

IndexContents

Contents

Index

Contents

Index

Products using wireless signals may interfere with the equipment on commercial aircraft, and

regulations require that all wireless devices be turned off when traveling in an airplane. Turn off the

Intuos tablet wireless signal by turning off or removing the wireless module (the Status LED will be

off) and DO NOT power on the wireless module during takeoff, transit, or landing.

Do not use Intuos wirelessly in a facility control system or any other environment that requires

extremely high reliability, or where the use of a wireless device may cause interference. Wireless

operation may interfere with or cause other electronic devices to malfunction, or other wireless

devices may interfere with or cause the tablet to malfunction. Where use of wireless products is

prohibited, power off or remove the wireless module (ensuring the wireless signal has been turned

off) to prevent the possibility of it interfering with or causing other electronic devices to malfunction.

Wacom does not accept any liability for direct or consequential damages. For details, please refer

to your Warranty, located within the Important Product Information document.

Power off your tablet in locations where/when electronic devices are not allowed. Because the

tablet may cause other electronic devices to malfunction in some locations where/when the use of

electronic devices is not allowed, such as within an airplane, be sure to turn off the tablet by

unplugging the USB connector from your computer.

OPTIMIZING THE WIRELESS CONNECTION

If your screen cursor lags behind the pen movement on the tablet or frequently “jumps” about, or if you see

excessive straight line segments when drawing in graphics applications, your wireless connection may not

be able to transmit all of the data from the tablet with the necessary speed. This may be caused by

interference from other radio sources, obstructions in the radio wave path, excessive distance from the

computer, or a combination of the above.

To improve the wireless connection and optimize tablet performance:

• Remove any metallic objects that may be in the line of sight between Intuos and the Wacom wireless

receiver attached to your computer.

• Try connecting the wireless receiver to a USB extension cable, and place it on your desktop or

somewhere in sight of Intuos.

• Move the tablet closer to your computer.

• Switch off any other devices operating in the 2.4 GHz radio spectrum, such as mobile telephones, etc.,

or move their antennas further away from your computer.