User Manual

IndexContents

Contents

Index

Contents

Index

TESTING THE TABLET CONTROLS AND TOOLS

If your Intuos tools or tablet controls do not work as you expect, it is a good idea to first check the assigned

functions or reset them to their default conditions. You will also want to do this if you have a touch-sensitive

tablet model and encounter problems with touch.

• Open the Wacom Tablet control panel and click on the A

BOUT button. In the dialog box that appears,

click D

IAGNOSE.... The DIAGNOSTICS dialog box shows dynamic information about the tablet, your tool(s),

and appropriate information for touch-sensitive tablets.

• If more than one tablet is connected to your system, in the T

ABLET INFO column select the unit for which

you are testing.

• Use the information shown in the D

IAGNOSTICS dialog box when testing your tablet and tools.

Note: If a tool button is set to R

ADIAL MENU or OPEN/RUN..., that function will occur when the button is

pressed. In this case you may want to change the button function before testing.

Testing the ExpressKeys

Testing a pen