User Manual

55
IndexContents
55
55
IndexContents
55
Contents
Index
Contents
Index
PEN PROBLEMS
The pen does not position the
screen cursor, or otherwise
work properly.
If the tablet driver does not load properly, pen input will not be
available.
• You will be able to use the pen tip to move the screen cursor and
click, but there will be no other pen functionality.
• For tablet models that combine pen input and touch, basic touch
movement will continue to be recognized but other actions and
gestures will not.
Install the driver software for the tablet.
The pen does not draw or ink
with pressure sensitivity.
Some applications require that you turn on the pressure capabilities
within the application or the selected tool before the pen will respond
as a pressure-sensitive tool.
Verify also that your application supports pressure sensitivity.
Clicking is difficult. Try using a lighter T
IP FEEL. See Adjusting tip feel and double-click.
Double-clicking is difficult. Be sure you are quickly tapping the tablet twice in the same place on
the tablet active area. Wacom recommends using the side switch to
double-click.
Open the Wacom Tablet control panel and go to the P
EN tab.
Try increasing the T
IP DOUBLE CLICK DISTANCE or using a lighter TIP FEEL.
Set an ExpressKey to D
OUBLE CLICK and use it to issue double-clicks.
Windows
: Try setting your system to launch programs with a single
click.
The pen selects everything, or
will not stop drawing.
Open the Wacom Tablet control panel and go to the P
EN tab. Move the
T
IP FEEL slider toward FIRM, or select CUSTOMIZE... and increase the
C
LICK THRESHOLD setting. If this does not help, see Testing the tablet
controls and tools.
The pen nib may be worn. See Replacing the pen nib
.
The eraser selects everything
or will not stop erasing.
Open the Wacom Tablet control panel and go to the E
RASER tab.
Move the E
RASER FEEL slider toward FIRM, or select CUSTOMIZE... and
increase the C
LICK THRESHOLD setting. If this does not help, see Testing
the tablet controls and tools.
You notice a screen delay at
the beginning of pen or inking
strokes.
Open the Wacom Tablet control panel and go to the P
EN tab and
decrease the T
IP DOUBLE CLICK DISTANCE. If that does not work, move
the T
IP DOUBLE CLICK DISTANCE slider to the OFF position in order to turn
off double-click assist.
Try turning off the operating system inking features.
You have to press hard with
the pen when clicking,
drawing, or writing.
Open the Wacom Tablet control panel and go to the P
EN tab. Move the
T
IP FEEL slider toward SOFT, or select CUSTOMIZE... and decrease the
S
ENSITIVITY and CLICK THRESHOLD settings.