Installation guide

Appendix
Page 50
PRODUCT SPECIFICATIONS
GENERAL SPECIFICATIONS
DISPLAY
Physical dimensions (W x D x H) 400 x 362 x 55.5 mm (15.8 x 14.3 x 2.2 in), excluding stand
Weight 6.0 kg (13.2 lb), including stand
Input voltage 12 VDC
Power consumption 37 W (max.)
2 W or less in sleep mode
1 W or less in off mode
USB hub Integrated USB hub: USB v2.0
Powered hub with two external ports, 500 mA per port
Operating temperature and humidity 5° to 35° C, 20 to 80% RH (non-condensing)
Storage temperature and humidity -10° to 60° C, 20 to 90% RH (non-condensing)
Certification and compliance FCC part 15 class B & Subpart C, Industry Canada Class B, CE,
VCCI class B, EDID 1.3, C-tick, BSMI, MIC, CB, CCC, The European
Union RoHS Directive 2002/95/EC, Chinese RoHS, Korean RoHS
Display a-Si TFT active matrix LCD
Screen size 17.0 in (337.9 x 270.3 mm (13.31 x 10.65 in))
Signal inputs VGA (Analog RGB)
Signal outputs VGA (Analog RGB)
Resolution 1280 x 1024 pixels (SXGA), 1024 x 768 pixels (XGA),
800 x 600 pixels (SGA), 640 x 480 pixels (VGA)
Refresh rate 50 to 75 Hz (vertical)
All scan modes are non-interlaced.
Pixel pitch 0.264 x 0.264 mm (0.010 x 0.010 in)
Color depth 16.7 million
Brightness
300 cd/m
2
Contrast ratio 650:1
Plug and Play DDC 2B
LCD quality Each DTF-720 LCD panel is produced under very stringent quality
standards. Production techniques cannot guarantee an absolutely
perfect TFT display. Wacom does not allow any pixel to be always
white or always black. A small number of pixels (5 or less) are
allowed to show a wrong color for some parts of the color spectrum.
This does not mean the display is defective.
DTF720_Manual.fm Page 50 Monday, December 22, 2008 9:17 AM