User's Manual

IndexContents

Interactive pen display

INSTALLATION

The computer treats the interactive pen display as two separate devices (the display and the pen tablet).

Therefore, the installation process is completed in two stages:

• First install as a display.

• Then install as a pen tablet.

Both stages require hardware and software installations and adjustments. Carefully follow ALL instructions.

Important: You MUST install the Wacom driver software for correct pen-on-screen functionality.

System requirements

Step 1: Pen display installation

Step 2: Pen tablet installation

SYSTEM REQUIREMENTS

Make sure your computer meets the following minimum system requirements.

DTU-1031:

• PC. Windows 8, Windows 7, Vista

™, or XP (32-bit). Available USB port and CD-ROM drive.

• Macintosh. OS X, v10.7 or greater. Available USB port, and CD-ROM drive.

DTU-1031X:

• PC. Windows 8, Windows 7, or XP (32-bit and 64-bit). Available USB port and CD-ROM drive.

• Macintosh. OS X, v10.7 or greater. Available USB port, and CD-ROM drive.

Note: Wacom recommends that you use both USB connectors to ensure adequate power for the pen

display. However, your system may operate satisfactorily with just one USB connector attached to

your computer.