User's Manual

IndexContents

Interactive pen display

USING THE PEN

The pen is cordless, battery-free, and senses the amount of pressure you apply to the tip.

Holding the pen

Positioning

Clicking

Dragging

Using the pen switch

Working with pressure sensitivity

Working with multiple monitors

HOLDING THE PEN

Hold the pen like you would a normal pen or pencil. As you work with the interactive pen display you can

rest your hand lightly on the display screen. You can tilt the pen in any way that feels most comfortable.

For information on changing the pen settings, see customizing

POSITIONING

To position the screen cursor, move the pen slightly above

the pen display screen without touching the screen surface.

Press the pen tip on the display screen to make a selection.

Note: Calibrating and adjusting the pen display

ensures

correct alignment of the screen cursor with the pen

tip. If the screen cursor does not jump to a position

near the pen tip when you place the pen on the

display screen, the pen display software driver may

not be installed or is not loading. Re-install the driver

software if necessary. Also see troubleshooting