User's Manual

99-00724-00 REV C0
19 | CHAPTER 2 – INSTALLING THE SMART INTERACTIVE PEN DISPLAY
On Screen Display (OSD) Settings
The OSD function enables you to optimize a variety of display settings at the touch of
a button. Make adjustments using the OSD controls located on the upper left edge of
the unit.
See the following pages for a detailed description of menu options.
NOTES
• After changing a setting, the OSD menu will automatically close after a few
moments of inactivity.
• You can also press the MENU button to close the OSD menu. All settings are
automatically saved when the OSD menu closes and will be used the next
time the unit receives a similar video signal. This is applicable to all display
modes. If you make changes to the display appearance and cannot return to
the original settings, use the RESET option to return the SMART Podium
ID422w to its original factory defaults.
To adjust the screen 1. Press the Menu button on the interactive pen display to open the
On Screen Display Menu.
2. Press the – and + buttons to select an option.
NOTE
You can use only the interactive pen display’s – and + buttons to scroll.
3. The available display options are described below.
4. With the option highlighted, press the Enter button.
5. Use the – and + buttons to alter the settings for the chosen option.
6. Press the Enter button to save your changes.
7. Repeat steps 2 through 5 to perform more adjustments.
8. Press the Menu button to exit the On Screen Display Menu.
MENU button Press to open or exit the OSD menu.
+ and -
selection buttons
Use these buttons to select an option. When the option you
want to adjust is highlighted, press the ENTER button. The
current settings and adjustment sub-menu for that option
will appear. Note that some settings may not be available
when in DVI mode. Use the + or – buttons to select and
adjust the option settings. (Press the + button to increase a
selected item value. Press the – button to decrease it.)
ENTER button After making changes, press the ENTER button to save.