User's Manual

20 | CHAPTER 2 – INSTALLING THE SMART INTERACTIVE PEN DISPLAY
99-00724-00 REV C0
To adjust the
pitch and phase
1. Press the Menu button.
The On Screen Display Menu opens.
2. Use the – and + buttons to select the Pitch option, and then press the
Enter button.
The Pitch screen appears.
3. Use the – and + buttons to evenly display the pattern of vertical stripes on
the screen.
4. Press the Enter button.
5. Use the – and + buttons to select the Phase option, and press the Enter button.
The Phase screen appears.
6. Use the – and + buttons to make the adjustment pattern show clearly.
7. Press the Menu button to exit the On Screen Display Menu.
NOTE
When you adjust the pitch and phase in VGA mode, some computers and video
cards may not allow the auto-sync function to fully work when the SMART Podium
ID422w is first connected. If some portion of text appears blurred, use the AUTO
ADJUST option to automatically synchronize to the incoming signal. For optimum
display quality, set your video card to the SMART Podium ID422w’s native
resolution of 1920 x 1080.