User's Manual

34 | CHAPTER 4 – MAINTAINING THE INTERACTIVE PEN DISPLAY
99-00724-00 REV C0
Cleaning the Pen
To clean the pen, use a soft cloth with a mild detergent.
The tethered pen is a sealed unit that contains electronics but no batteries. If you
attempt to open the tethered pen, you’ll damage these electronics. This will make the
tethered pen unusable and void the warranty.
Don’t immerse the pen in liquid.
Don’t use a pen if the tip has worn down to become sharp or angular, as it may
damage the screen. Replace the tip when you notice it becoming short or angular.
Replacing the Pen Tip
Your interactive pen display comes with five replacement pen tips and an o-ring tool to
assist in tip replacement. If you require more replacement tips, contact Technical
Support page 25.
NOTE
If you misplace your o-ring tool, you can use a pair of tweezers or pliers to remove
the old tip.
To replace the pen tip 1. Using the o-ring tool, grab the pen tip, and slide it straight out of the pen.
2. Insert a new tip straight into the barrel of the pen. Push the tip firmly until it stops.
O-Ring Tool
Stylus Tip
Pen Tip