User's Manual
Table Of Contents
- Your interactive pen display
- Installation
- Working with the interactive pen display
- Customizing
- Troubleshooting
- Appendix
- Caring for the interactive pen display
- Replacing the pen tip
- Using an alternate mount or stand
- Uninstalling the interactive pen display
- Managing preferences
- Installing multiple tablets
- Pen and digital ink capabilities in Windows
- About the Windows Tablet PC Input Panel
- Product specifications
- Product information
- Ordering parts and accessories
- Available parts and accessories
- Radio and television interference
- Precautions
- Warranty (Worldwide, Except for Europe, Africa and Middle East)
- Licence warranty conditions (Europe, Africa and Middle East)
- Glossary
50
Index
Contents
50
Index
Contents
Interactive pen display
VGA PROBLEMS
The display ripples or flickers. • Open the OSD menu and select the AUTO ADJUST option.
Then, if necessary, manually adjust pitch and phase.
• Verify that the display adapter or video card matches the
specifications for the interactive pen display.
• Adjust the refresh rate in the display properties control panel.
The display is not clear.
Text or other portions of the
screen appear blurred.
• Set the display resolution of your video card to the maximum
(native) resolution that can be used with your pen display. See the
product specifications
for details.
• Turn off the pen display, then turn it back on.
• Open the OSD menu and select the A
UTO ADJUST option.
If necessary, manually adjust the brightness, pitch, and phase
settings.
The display and LCD panel are
not lined up. The display size
is not correct.
• Open the OSD menu and select the A
UTO ADJUST option.
• As necessary, adjust pitch and phase, and horizontal and vertical
position. Note that some video cards may not show the display in
proper sizing.
The display ripples or shows a
moiré pattern. The display
color is not even.
• Open the OSD menu and select the A
UTO ADJUST option. If this
does not solve the problem, select the R
ESET option to set the
display back to the factory default settings.
• As necessary, adjust pitch and phase.