User's Manual

10
As the tablet portion of DTU-710 emits electromagnetic waves at a certain frequency, if another tablet is closely
placed to DTU-710, the screen cursor may jitters or jumps around. To solve this problem, place the tablet away
from DTU-710.
Front View
As properties of LCD panel display, you may notice the followings. They do not mean the LCD is defective.
- When exerting hard downward pressure on the display, a moir pattern may temporarily appear.
- A very small number of pixels may appear in incorrect color.
- If an image area has fine striping (such as screen stripes), it may flicker or display a moir pattern or pooling
image.
- When a still image is displayed for a long period of time, an afterimage may remain for a short period of time.
Power Switch
Turns the power to the unit on or off.
POWER
STATUS
ENTER
EN
-
MENU
*2
DTU-710 Component Functions
Power Lamp
Lights blue when power and video signals
have properly been supplied to DTU-710.
Turns orange or flashes when your com-
puter goes into power management mode
and stops sending the video signal to
DTU-710.
Status Lamp
Lights blue when a pen switch is pressed,
or when the eraser enters proximity of the
tablet.
ENTER Button
Press this button when you select or exit
an item in the OSD
*1
menu.
☞
P 15
- (minus) Button, + (plus) Button
In the OSD
*1
menu, Use these buttons to select an option that can
then be activated. After activating a selected option, press the +
button to increase a selected item value, and press the - button to
decrease it.
MENU Button
Opens and closes
the OSD
*1
menu.
Integrated Tablet and LCD Screen
The LCD monitor
*2
and tablet sensor function
*3
as
an integrated input and output device.
The LCD resolution is 1280 x 1024 pixels at
16,777,216 colors. The tablet sensor reports coor-
dinates, pressure, switch, and eraser information.
*3
*1
On Screen Display.
☞
P. 15
DTU-710_EN.indd 10 04.7.20 8:31:42 PM