Cintiq20WSX_Manual.
Cintiq20WSX_Manual.fm Page 0 Monday, January 15, 2007 9:23 AM Wacom Cintiq® 20WSX Installation Guide & Hardware Manual for Cintiq 20WSX (DTZ-2000W) English version 1.0, January 15, 2007 Copyright Wacom Company, Limited, 2007 All rights reserved. No part of this manual may be reproduced except for your express personal use. Wacom reserves the right to revise this publication without obligation to provide notification of such changes.
Cintiq20WSX_Manual.fm Page 1 Monday, January 15, 2007 9:23 AM INTRODUCTION AND OVERVIEW Wacom® Cintiq® The 20WSX pen display combines the benefits of an LCD monitor with the control, comfort, and productivity of Wacom’s cordless, battery-free pen technology. This gives you a direct pen-on-screen interface that can be used with a Personal Computer (PC) or Macintosh® computer. Cintiq’s basic components include a Wacom pen tablet internally mounted behind a 20.
Cintiq20WSX_Manual.fm Page 2 Monday, January 15, 2007 9:23 AM PRECAUTIONS ON USE AND HANDLING Be sure to follow all instructions, cautions, and warnings found within this manual. Failure to do so could cause the loss of data or damage to your computer. Failure to do so could also void your warranty, in which case Wacom shall have no responsibility to repair or replace the product.
Cintiq20WSX_Manual.fm Page 3 Monday, January 15, 2007 9:23 AM Handling WARNING High Voltage. Do not open or disassemble the Cintiq pen display. There is a risk of electrical shock when the casing is open. This will also void your warranty and Wacom shall have no responsibility to repair or replace the product.
Cintiq20WSX_Manual.fm Page 4 Monday, January 15, 2007 9:23 AM CAUTION Do not put heavy articles on the pen display or push against it with a strong force; this may damage the display screen or break the Cintiq stand locking mechanism. CAUTION Do not place heavy articles on the Cintiq cabling, repeatedly bend the cables sharply, or apply heavy stress to the cable connectors; this may damage the unit or cabling.
Cintiq20WSX_Manual.fm Page 5 Monday, January 15, 2007 9:23 AM CONTENTS Introduction and overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 Precautions on use and handling . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Physical location . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Environment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Usage . . . . . . . . . . . . . . . . . . . .
Cintiq20WSX_Manual.fm Page 6 Monday, January 15, 2007 9:23 AM Appendix . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Caring for Cintiq . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Optional display configurations . . . . . . . . . . . . . . . . . . . . . . . . . . . Using an alternate mount or stand . . . . . . . . . . . . . . . . . . . . . . . . . Pen and digital ink capabilities in Windows Vista . . . . . . . . . . . . . .
Cintiq20WSX_Manual.fm Page 7 Monday, January 15, 2007 9:23 AM UNPACKING YOUR CINTIQ Package contents You will find parts and accessories packed together in the accessories box. To avoid damaging your product, please review the instructions on the following pages before setting up or using Cintiq or the Cintiq stand.
Cintiq20WSX_Manual.fm Page 8 Monday, January 15, 2007 9:23 AM Setting up the Cintiq stand Place the stand on your desktop or work surface, making sure the stand is stable and will not tip or fall when the pen display is mounted on it. Then familiarize yourself with the stand components.
Cintiq20WSX_Manual.fm Page 9 Monday, January 15, 2007 9:23 AM Unpacking and mounting the Cintiq pen display Remove any packing materials from the back of the display unit and cabling. To mount Cintiq on the stand: • Make sure the stand is stable on your desktop or other work surface and will not tip or fall when Cintiq is mounted on it. • Securely grasp Cintiq with both hands so that the display faces toward you, with the power switch and LEDs located at the top.
Cintiq20WSX_Manual.fm Page 10 Monday, January 15, 2007 9:23 AM WARNING When operating the incline adjustment levers, Cintiq must be mounted on the stand with the stand feet resting on a stable, flat surface. The stand is spring-loaded and can snap back quickly, causing injury or damage if not operated properly. –B– After the display unit has been mounted on the stand, remove the foam blocks that lock the adjustment levers in place.
Cintiq20WSX_Manual.fm Page 11 Monday, January 15, 2007 9:23 AM Adjusting rotation The pen display can be rotated on the display stand when the incline is less than or equal to 25 degrees. To adjust rotation, grasp Cintiq by the main body and rotate the unit to the desired position; it will move on the bearing hub. You can only rotate the display unit 180 degrees in either direction.
Cintiq20WSX_Manual.fm Page 12 Monday, January 15, 2007 9:23 AM Removing Cintiq from the display stand To remove Cintiq from the display stand: • If the rotation lock screws are attached, remove them from the back of Cintiq. • Position the pen display to landscape orientation before removing it from the display stand. The stand will not release unless Cintiq is in landscape orientation. • Next, raise the stand incline to the highest position. See Adjusting the display incline on page 10 for instructions.
Cintiq20WSX_Manual.fm Page 13 Monday, January 15, 2007 9:23 AM CINTIQ PEN DISPLAY COMPONENTS After the Cintiq pen display is safely mounted on the Cintiq stand, take some time to familiarize yourself with its features and components. The LCD monitor and tablet sensor function as an integrated input and output device. The LCD monitor supports resolutions up to 1680 x 1050 pixels at 16.7 million colors. The tablet sensor reports pen coordinates, pressure, tilt, switch, eraser, and other information.
Cintiq20WSX_Manual.fm Page 14 Monday, January 15, 2007 9:23 AM Rear view On Screen Display (OSD) controls These controls enable you to adjust a variety of display settings. See Adjusting the LCD monitor on page 36 for more information. Integrated pen holder and alternate cable exit The pen can be stored here. If you are not using the Cintiq stand supplied with the unit, you can route the cable to exit from this location. See Using an alternate mount or stand on page 57.
Cintiq20WSX_Manual.fm Page 15 Monday, January 15, 2007 9:23 AM INSTALLATION System requirements Before installing Cintiq, make sure your computer meets the following minimum system requirements: • PC. Windows Vista™, Vista x64, XP, XP x64, or 2000. DVI or VGA video connector, available USB port, and CD-ROM drive. • Macintosh. OS X, v10.3.9 or greater. DVI or VGA video connector, available USB port, and CD-ROM drive. ADC connectors require an ADC to DVI-I adapter, not included.
Cintiq20WSX_Manual.fm Page 16 Monday, January 15, 2007 9:23 AM Step 1: LCD monitor installation In the first stage of the installation process, Cintiq is installed as a monitor on your system. As you work through the first stage of the installation process, please refer to the LCD monitor cabling diagram on page 18 when making cable connections. Important: Do not connect the USB data cable until instructed to do so. • • • Turn off your computer.
Cintiq20WSX_Manual.fm Page 17 Monday, January 15, 2007 9:23 AM If you are connecting to an Apple computer with one of the following video ports, you will need to use an adapter: Apple ADC connector Mini-VGA port • • If you are connecting to an ADC connector, you will need to obtain an ADC to DVI-I adapter. Plug the Cintiq video cable into the ADC to DVI-I adapter. Then plug the ADC adapter end into the ADC connector on your video card.
Cintiq20WSX_Manual.fm Page 18 Monday, January 15, 2007 9:23 AM LCD monitor cabling diagram –A– DIGITAL/ANALOG (DVI/VGA) switch CAUTION Make sure your video card has a DVI or VGA connector, and that you correctly set the Cintiq Digital/Analog (DVI/VGA) switch for the video connector you are using. Do not attach the USB data cable until instructed to do so. Cintiq, rear view –B– –C– Video card DVI or VGA DC INput DVI-I connector To connect to a DVI-D connector, use the DVI-D to DVI-I adapter cable.
Cintiq20WSX_Manual.fm Page 19 Monday, January 15, 2007 9:23 AM • • Turn on Cintiq. The power LED will light orange. Next, turn on your computer. For Windows systems, Cintiq will automatically install as a default monitor. If you want Cintiq to be identified as a Cintiq display and if you want to install the color calibration profile for Cintiq, follow the instructions below to update the display driver for Cintiq: 1. From the CONTROL PANEL folder, open the DISPLAY PROPERTIES control panel.
Cintiq20WSX_Manual.fm Page 20 Monday, January 15, 2007 9:23 AM • • • As necessary, configure the display control panel settings for the proper size and color resolution. The maximum (native) resolution of the Cintiq 20WSX is 1680 x 1050 pixels with 24 bit color (8 bits per color). The display size and color resolution may be constrained by the capabilities of your video card. See the video card manufacturer’s documentation for details.
Cintiq20WSX_Manual.fm Page 21 Monday, January 15, 2007 9:23 AM Step 2: Pen tablet installation USB cable installation Plug the USB connector into an available USB port on your computer or into a USB hub attached to your computer. Next, move on to the pen tablet Software installation on page 22. You must install the Wacom tablet driver software for full tablet functionality.
Cintiq20WSX_Manual.fm Page 22 Monday, January 15, 2007 9:23 AM Software installation IMPORTANT: You MUST install the Wacom pen tablet driver software for full pen and tablet functionality, otherwise the Cintiq pen will only function as a mouse device and the extended pen and tablet features will not be available. To install the tablet software: • Save your work and close all open applications before installing the tablet software. Temporarily disable any virus protection programs.
Cintiq20WSX_Manual.fm Page 23 Monday, January 15, 2007 9:23 AM WORKING WITH YOUR CINTIQ Using the pen As you work with Cintiq, you can rest your hand lightly on the display screen, just as if it were a drawing board or sheet of paper. The Grip Pen is cordless, battery-free, and sensitive to the tilt and pressure you exert upon it. Hold the Grip Pen as you would a normal pen or pencil.
Cintiq20WSX_Manual.fm Page 24 Monday, January 15, 2007 9:23 AM Pen operations The basic methods of working with the pen are as follows: Pointing and selecting: Move the Grip Pen above the Cintiq display screen to position the screen cursor. The pen tip needs to be within 5 mm (0.2 inch) of the pen display tablet surface; you do not need to touch the tablet surface to move the screen cursor. The cursor jumps to the location where you place the pen (absolute positioning).
Cintiq20WSX_Manual.fm Page 25 Monday, January 15, 2007 9:23 AM Working with the tablet controls The customizable ExpressKeys and Touch Strips enable you to speed up your workflow in graphics or other applications. While using the pen with your dominant hand, you can simultaneously use your other hand to operate the ExpressKeys or Touch Strip. For example, use the ExpressKeys to quickly change your tool properties, or slide your finger over the Touch Strip to quickly zoom in or out.
Cintiq20WSX_Manual.fm Page 26 Monday, January 15, 2007 9:23 AM Using the ExpressKeys Press the ExpressKeys with your secondary hand to toggle between tools or change tool properties while using your primary hand to work with your pen on the display tablet surface. All ExpressKeys can be customized. The default settings were chosen to optimize your workflow in Photoshop and other graphics applications using the following modifier functions: Button 1: CTRL modifier key for Windows.
Cintiq20WSX_Manual.fm Page 27 Monday, January 15, 2007 9:23 AM The ExpressKeys enable you to speed up many common tasks. You can work with the default settings, or choose from any of the other available functions. For example: • Quickly change the functionality of a Touch Strip by first pressing a corresponding ExpressKey that has been customized for the TOUCH STRIP MODIFIER function and then using the Touch Strip.
Cintiq20WSX_Manual.fm Page 28 Monday, January 15, 2007 9:23 AM Using the Touch Strips The customizable Touch Strips can be operated in several different ways: • Standard operation: Slide your finger up or down to zoom, scroll, or issue the assigned keystroke function. By sliding your finger over the Touch Strip you can quickly zoom in or out, scroll up or down, or perform other functions. You can do this with your secondary hand while using your primary hand to work with the Grip Pen.
Cintiq20WSX_Manual.fm Page 29 Monday, January 15, 2007 9:23 AM • Touch Strip Modifier operation: The upper pair of ExpressKeys located to the left and right of your pen display enable you to modify the function of the corresponding Touch Strip. To modify the Touch Strip function: 1. Press and hold the ExpressKey. 2. Then slide or press your finger on the Touch Strip.
Cintiq20WSX_Manual.fm Page 30 Monday, January 15, 2007 9:23 AM Setting up your work area The Cintiq 20WSX pen display and stand were designed to provide you with the widest possible range of flexibility and ergonomic work approach. The design allows you to quickly adjust Cintiq to a different position whenever the need arises. You may want to experiment with different height adjustments to determine which best fits your particular working style and tasks.
Cintiq20WSX_Manual.fm Page 31 Monday, January 15, 2007 9:23 AM Hints: • If the rotation lock screws are attached to the back of Cintiq, they must be removed before Cintiq can be rotated. • Before rotating the display unit, be sure the cable is freely rotating behind the unit. • Because the Cintiq drawing surface will be a little higher than your desk, consider adjusting the height of your desk or chair to assure comfortable use of the device.
Cintiq20WSX_Manual.fm Page 32 Monday, January 15, 2007 9:23 AM CUSTOMIZING After you master the basics of using your Grip Pen on the Cintiq pen display, you may want to customize the way the pen or pen display works. The Wacom Tablet control panel makes it easy to customize Cintiq and the pen. Opening the control panel To open the control panel, use the Cintiq pen on the pen display tablet: Windows. Click on the Windows START button and choose ALL PROGRAMS. (For Windows 2000, choose the PROGRAMS group.
Cintiq20WSX_Manual.fm Page 33 Monday, January 15, 2007 9:23 AM Customization basics This manual only covers the basics of customizing Cintiq. For detailed information see the Cintiq Software User’s Manual. If you installed the Wacom tablet software, just open the Wacom Tablet control panel and click on the HELP button to display the manual. You can also access the manual from the Installation menu on the Wacom Pen Tablet Driver CD. Open the Wacom Tablet control panel to customize your product.
Cintiq20WSX_Manual.fm Page 34 Monday, January 15, 2007 9:23 AM Calibrating Cintiq You will need to calibrate the pen display tablet in order to align the screen cursor position with the position of the pen on the display screen. This is required to adjust for parallax caused by the display screen cover glass and coating. Set Cintiq in its working position, then follow the procedure below.
Cintiq20WSX_Manual.fm Page 35 Monday, January 15, 2007 9:23 AM Learning more about Cintiq Refer to the electronic Software User’s Manual for detailed information on customizing Cintiq. To view the manual, open the Wacom Tablet Control Panel and click on the HELP button. To read the Software User’s Manual before installing Cintiq, first insert the Wacom Pen Tablet Driver CD into your computer’s CD-ROM drive. When the software menu appears, select the USER’S MANUAL option.
Cintiq20WSX_Manual.fm Page 36 Monday, January 15, 2007 9:23 AM Adjusting the LCD monitor Factory presets, auto-sync, and user settings Factory presets: For optimal display quality, set your video card to Cintiq’s native resolution of 1680 x 1050 pixels (WSXGA). See page 62 for signal specifications. Auto-sync: When connected as a VGA display, Cintiq attempts to automatically synchronize to the incoming signal. At the native resolution of 1680 x 1050, the vertical refresh frequency must be set to 60 Hz.
Cintiq20WSX_Manual.fm Page 37 Monday, January 15, 2007 9:23 AM The basic process for working with the OSD is as follows: • Press the MENU button to open the OSD main menu. • Use the up or down buttons to select an option. When the option you want to adjust is highlighted, press the ENTER button. The current settings and adjustment sub-menu for that option will appear. • Use the up or down buttons to adjust the option settings. • When you have made your changes, press the ENTER button to save.
Cintiq20WSX_Manual.fm Page 38 Monday, January 15, 2007 9:23 AM SETUP. Select to adjust the display screen backlighting and OSD menu display options. BACKLIGHT. Increases or decreases the backlight brightness level. TRANSPARENCY. Adjusts the transparency of the OSD menu. TIME OUT. Sets the display time of the OSD menu, in seconds. SCALE. Enables you to choose how the image is displayed when working at resolutions below 1680 x 1050. FULL resizes the image to fill the whole screen.
Cintiq20WSX_Manual.fm Page 39 Monday, January 15, 2007 9:23 AM Adjusting pitch and phase (VGA only) Some computers and video cards may not allow the auto-sync function to fully work when Cintiq is first connected. If some portion of text appears blurred, open the OSD menu, go to the RESET menu, and select the AUTO ADJUST option. If the image is still blurred, adjust the pitch and phase manually by following the procedure below.
Cintiq20WSX_Manual.fm Page 40 Monday, January 15, 2007 9:23 AM Power saving Cintiq conforms to VESA and ENERGY STAR® power saving guidelines. When using Cintiq with a Display Power Management Signaling (DPMS) compliant computer or video card, the display will automatically comply with the below power saving parameters.
Cintiq20WSX_Manual.fm Page 41 Monday, January 15, 2007 9:23 AM TROUBLESHOOTING Most of the time your pen display tablet will work flawlessly. But if you are having trouble, Wacom recommends you do the following: 1. If Cintiq does not function properly, refer to the troubleshooting section below. See also Display troubleshooting on page 45, or look in the Pen tablet troubleshooting on page 47. Your problem may be described there and you can try the solution offered. 2.
Cintiq20WSX_Manual.fm Page 42 Monday, January 15, 2007 9:23 AM 3. Verify that the tablet and Grip Pen are working: • Press the Grip Pen tip against the display and verify that the status LED lights blue. • If the LED does not light, verify that Cintiq’s USB cable is plugged into an active USB port. If Cintiq is plugged into a USB hub, try plugging Cintiq directly into the USB port on your computer. • Be sure that the USB port to which you are connecting Cintiq has not been disabled.
Cintiq20WSX_Manual.fm Page 43 Monday, January 15, 2007 9:23 AM Testing your input tools and pen display controls If the Grip Pen, or the Cintiq ExpressKeys or Touch Strips do not work as you expect, it is a good idea to first check the assigned functions or reset them to their default conditions. A quick way to reset a pen to its default settings is to remove it from the TOOL list by clicking on the list’s [ – ] button.
Cintiq20WSX_Manual.fm Page 44 Monday, January 15, 2007 9:23 AM Testing a pen 1. While observing the POINTING DEVICE INFO column, bring your pen within 5 mm (0.2 inch) of the display screen. A value for PROXIMITY, the DEVICE NAME, DEVICE TYPE, and a DEVICE S/N (serial number) should be displayed. If you have more than one Cintiq unit connected to your system, be sure to select the unit for which you are testing a pen in the TABLET INFO column. 2. Move your tool along the tablet surface.
Cintiq20WSX_Manual.fm Page 45 Monday, January 15, 2007 9:23 AM Display troubleshooting If you encounter problems with the Cintiq display, refer to the following tables; your problem may be described here and you can try the solution offered. For additional information about color issues, refer to the documentation that came with your operating system or applications. General display problems No display. The power LED is off. • No display. The power LED is lit blue. • The power LED is lit orange.
Cintiq20WSX_Manual.fm Page 46 Monday, January 15, 2007 9:23 AM When a still image is displayed for a long period of time without refreshing the screen, an afterimage remains for a short period of time. Color quality is inaccurate. • Use a screen saver or other power management feature. • Open the OSD menu, go to the RESET menu and select the RECALL option. Be sure the Cintiq color profile has been installed and is selected as the profile for use with your operating system and applications.
Cintiq20WSX_Manual.fm Page 47 Monday, January 15, 2007 9:23 AM Pen tablet troubleshooting If you encounter problems with the Cintiq pen display tablet, refer to the following tables. Your problem may be described here, and you can try the solution offered. Be sure you refer to the Cintiq Read Me file for the latest information. For additional information, visit Wacom’s web site at http://www.wacom.com/productsupport and follow the links to the FAQs.
Cintiq20WSX_Manual.fm Page 48 Monday, January 15, 2007 9:23 AM The eraser selects everything or will not stop erasing. You notice a delay at the beginning of pen strokes. You have to press hard with the pen when clicking or drawing. The pen tip does not function. Changing the function settings for an input tool has no effect. The side switch does not work. Troubleshooting Page 48 Open the Wacom Tablet control panel and go to the ERASER tab.
Cintiq20WSX_Manual.fm Page 49 Monday, January 15, 2007 9:23 AM The pen tip and screen cursor do not properly line up. The screen cursor moves but it does not jump to the pen tip location when the pen is placed on the display screen, and it does not follow the pen tip when the pen is moved across the display. When using Cintiq on a multiple monitor system, you cannot use the pen to control the other monitor(s).
Cintiq20WSX_Manual.fm Page 50 Monday, January 15, 2007 9:23 AM You suspect the pen tablet preferences may be corrupted, or want to make certain that all settings are at their factory defaults. The screen cursor moves erratically or jumps around on the display screen when another tablet is connected to your computer. Cintiq has stopped working. The pen no longer turns the status LED blue, or the status LED is always blue.
Cintiq20WSX_Manual.fm Page 51 Monday, January 15, 2007 9:23 AM Windows-specific problems After changing right- and left-handed settings in the computer’s mouse control panel, the pen tip no longer functions properly. Restart Windows for your Wacom tool settings to be correctly recognized. Macintosh-specific problems At startup, a dialog box appears telling you that either the driver failed to load or the tablet preferences have not yet been created. Inkwell does not work correctly with Cintiq.
Cintiq20WSX_Manual.fm Page 52 Monday, January 15, 2007 9:23 AM Technical support options If you have a problem with your Cintiq pen display, first check the Installation section in this guide to make sure the unit is installed correctly. Then review the Troubleshooting procedures within this guide; your problem may be described there and you can try the solution(s) offered.
Cintiq20WSX_Manual.fm Page 53 Monday, January 15, 2007 9:23 AM Obtaining driver downloads Wacom periodically updates the pen tablet software driver to maintain compatibility with new products. If you are having a compatibility problem between your Cintiq pen display and a new hardware or software product, it may be helpful to download a new Wacom tablet software driver (when available) from the Internet. USA, Canada, Central and South America Worldwide Web: http://www.wacom.
Cintiq20WSX_Manual.fm Page 54 Monday, January 15, 2007 9:23 AM APPENDIX Caring for Cintiq Keep the Grip Pen and your Cintiq LCD screen surface clean. Dust and dirt particles can stick to the pen and cause wear to the display screen surface. Regular cleaning will help to prolong the life of your LCD screen surface and pen. Keep Cintiq, the Cintiq stand, and the Grip Pen in a clean, dry place and avoid extremes in temperature. Room temperature is best.
Cintiq20WSX_Manual.fm Page 55 Monday, January 15, 2007 9:23 AM Replacing the pen tip The pen tip (nib) will wear with normal use. Excessive pressure will cause the nib to wear sooner. When the nib gets too short or develops a sharp edge, replace it with one of the extra nibs that came with the pen. To remove the old nib: Clasp it with a Wacom nib extractor, pair of tweezers, needle-nosed plier, or similar instrument and pull the old nib straight out of the pen.
Cintiq20WSX_Manual.fm Page 56 Monday, January 15, 2007 9:23 AM Optional display configurations After mounting the pen display unit on the Cintiq stand, you can rotate the pen display tablet to a variety of positions. If you do not plan to rotate the Cintiq and want to fasten it more securely to the stand, you can install the rotation lock screws as shown below.
Cintiq20WSX_Manual.fm Page 57 Monday, January 15, 2007 9:23 AM Using an alternate mount or stand Cintiq can be attached to any mount arm or stand conforming to the VESA 100 standard. Mounting screws that are 4 mm wide with a 0.7 mm pitch (M4 Regular), with a screw clearance depth from 13 – 18 mm are required. To attach Cintiq to a VESA 100 mounting platform: 1. Turn off your computer and power off Cintiq. Then disconnect all cables from between the unit and your computer. 2.
Cintiq20WSX_Manual.fm Page 58 Monday, January 15, 2007 9:23 AM 4. Next remove the four attachment screws from the cable cover plate and lift the plate away from the pen display unit. 5. Place the cable into the cable exit channel. Then reattach the cable cover plate making sure to use the correct screws for reattachment. (The cable cover plate screws are shorter than the bearing hub attachment screws.) 6.
Cintiq20WSX_Manual.fm Page 59 Monday, January 15, 2007 9:23 AM 6. Taking care not to dislodge the bearing stopper from the hub section, position the two halves of the bearing hub together around the pen display tablet cable and over their attachment points. Proper positioning shows the hub sections aligned along the horizontal axis of the pen display tablet. The section containing the bearing stopper should be positioned toward the top of the pen display tablet. 7.
Cintiq20WSX_Manual.fm Page 60 Monday, January 15, 2007 9:23 AM Pen and digital ink capabilities in Windows Vista Microsoft Windows Vista provides extensive support for pen and touch input. When using Cintiq with a computer running Windows Vista, your experience is enhanced by powerful note taking, handwriting recognition, fast navigation, and other digital inking options designed to give you quick, intuitive results with the Wacom pen. • Note taking.
Cintiq20WSX_Manual.fm Page 61 Monday, January 15, 2007 9:23 AM Uninstalling Cintiq Follow the appropriate procedure below to remove the Wacom tablet software and Cintiq pen display from your system. Important: When you remove the Wacom tablet driver software from your system, any other Wacom tablet connected to your computer will no longer operate with full Wacom tablet functionality. Windows: 1. Click on the Windows START button and open the CONTROL PANEL. 2.
Cintiq20WSX_Manual.fm Page 62 Monday, January 15, 2007 9:23 AM Product specifications Cintiq 20WSX (model DTZ-2000W) general specifications Physical dimensions (W x D x H) 547 x 367 x 46 mm (21.55 x 14.46 x 1.81 in), excluding stand Weight 7.4 kg (16.3 lb), excluding stand 9.1 kg (20.
Cintiq20WSX_Manual.fm Page 63 Monday, January 15, 2007 9:23 AM Pen tablet Reading technology Electromagnetic resonance technology Active area 433.4 x 270.9 mm (17.0 x 10.7 in) Resolution 0.005 mm/point (5080 lpi) Accuracy ±0.5 mm (±0.02 in), average Tilt range (all pens) ±60 degrees Reading height 5 mm (0.2 in) Maximum report rate 136 points/sec. ExpressKeys stroke 1 mm (0.04 in), approximately Touch Strips 52 mm (2.0 in) x 12 mm (0.
Cintiq20WSX_Manual.fm Page 64 Monday, January 15, 2007 9:23 AM Accessories Airbrush. A true digital airbrush incorporating a pressure-sensitive tip and eraser, tilt sensitivity, and a fingerwheel that provides an additional degree of control over the application of digital paint. This tool also includes a programmable side switch. ZP-400E 6D Art Pen. This pen provides rotation sensing technology with a unique chisel-shaped nib that emulates brushes, markers, and calligraphic pens.
Cintiq20WSX_Manual.fm Page 65 Monday, January 15, 2007 9:23 AM Display adapters VGA to DVI-I adapter Part number STJ-A252 Video card connection: VGA (RGB analog, male) Display connection: DVI-I, female DVI-D to DVI-I adapter Part number STJ-A253 Video card connection: DVI-D, male Display connection: DVI-I, female Purchasing parts and accessories To purchase parts and accessories, refer to the Cintiq Read Me file and see who to call for your region.
Cintiq20WSX_Manual.fm Page 66 Monday, January 15, 2007 9:23 AM Radio and television interference The equipment described in this manual generates, uses, and can radiate radio-frequency energy. If it is not installed and used properly – that is, in strict accordance with Wacom instructions – it may cause interference with radio and television reception. Federal Communications Commission (FCC) notice This device complies with Part 15 of the FCC Rules.
Cintiq20WSX_Manual.
Cintiq20WSX_Manual.fm Page 68 Monday, January 15, 2007 9:23 AM Warranty Service in the U.S.A. and Canada To obtain Warranty service within the U.S. or Canada contact: Wacom Technical Support Phone: 1.360.896.9833 Fax: 1.360.896.9724 Inquiry Form: http://www.wacom.com/productsupport/email.cfm E-mail: support@wacom.com Warranty Service Outside of the U.S.A.
Cintiq20WSX_Manual.fm Page 69 Monday, January 15, 2007 9:23 AM Wacom Technology Corporation Wacom Europe GmbH 1311 SE Cardinal Court Europark Fichtenhain A9 Vancouver, WA 98683 47807 Krefeld U.S.A. Germany Telephone Telephone General: +1.360.896.9833 General: +49.(0)2151.3614.0 Fax: +1.360.896.9724 Fax: +49.(0)2151.3614.111 Wacom Co., Ltd. Wacom Co., Ltd.
Cintiq20WSX_Manual.fm Page 70 Monday, January 15, 2007 9:23 AM Installation Guide & Hardware Manual for Cintiq 20WSX (DTZ-2000W) Wacom Co., Ltd.