User's Manual

12
This will reverse the right and left button settings on your
Wacom tools.
Restart Windows for your Wacom tool settings to be cor-
rectly recognized.
Open the Wacom control panel and go to the MAPPING
tab. Verify that PEN MODE is selected and that the DIS-
PLAY AREA is set to ENTIRE DISPLAY for the selected tool
and application. If this does not help, click on the RESET
TAB TO DEFAULTS button to reestablish tablet to screen
mapping. If this does not work, open the Windows folder
and delete the WACOM.DAT file. Then restart your com-
puter. When the tablet driver loads, it will create a new
preferences file with the factory default settings.
If you have had another manufacturer's tablet, and the driv-
ers are still loaded on your system, uninstall these drivers
according to their manufacturer's instructions and reinstall
the LLC Tablet driver.
ACECAT: Edit your SYSTEM.INI. Go to the drivers=line in
the [boot] section and remove awintab. Then go to the
[drivers] section and remove the awintab=awintab.drv line.
Look also for any reference to Virtual Tablet and remove it.
Save the changes and restart Windows.
KURTA: Edit your SYSTEM.INI by looking for any references
to wtkurta and removing them. Save the changes and re-
start Windows.
When the CLOSE PROGRAM dialog box (Windows 95, 98
or Me) or the TASK MANAGER (Windows NT) is active, the
Wacom tablet will not work. Use your mouse or keyboard
to continue. When this dialog box is closed, you can again
use your LLC Tablet tool to control the screen cursor.
After switching to left-
handed mouse in the
Mouse control panel, the
pen tip no longer works as
a left click
Cannot move the cursor
where you want to on the
screen, or the line you are
drawing does not line up
with the location of the
pointer in paint applica-
tions.
When the pen tip contacts
the tablet surface, the cur-
sor jumps to the top left
corner of the screen, or the
message, "Unable to imple-
ment function", appears in
the Wacom control panel.
After pressing CTRL+
ALT+DEL, the screen cur-
sor cannot be controlled
with your LLC Tablet tool.
SYMPTOM HINT
TROUBLE SHOOTING
Windows and PC Specific Problems -- continued
LLCENSTDApply.pm65J 02.5.22, 10:13 AM12