User's Manual

HAVING TROUBLE?

Page 91

Contents

Index

TESTING YOUR GRAPHIRE TOOLS

From the Wacom control panel’s HELP menu, select DIAGNOSTICS... to open the DIAGNOSTICS dialog box.

The tablet driver version, tablet hardware and connection, and pointing device information is shown.

TESTING THE GRAPHIRE PEN

TESTING THE GRAPHIRE CORDLESS MOUSE

Testing the Graphire Pen

1. While observing the POINTING DEVICE INFO column, bring your Graphire tool within proximity of the

tablet. A value for proximity, the device name, and device type should be displayed.

2. Move the pen along the tablet surface. The X and Y D

ATA values should change to reﬂect the tool

position.

3. Test your Graphire Pen buttons. The tablet’s status LED should change color from orange to green

each time you click with the pen tip, press the side switch, or press the pen’s eraser to the tablet.

• Click on the tablet surface with the pen tip—the S

WITCHES state and PRESSURE value should

change. (P

RESSURE should change from approximately 0% with no pressure applied to

approximately 100% when full pressure is applied.)

• Next, press the side switch without pressing the tip to the tablet—the S

WITCHES state should

change. (Do this for both positions of the DuoSwitch.)

• Then press the pen’s eraser to the tablet—the S

WITCHES state and PRESSURE value will change.

RESSURE should change from approximately 0% with no pressure applied to approximately 100%

when full pressure is applied.)

4. When you are done, click on the C

LOSE button to exit the dialog box.

Pen

Tip = 1, DuoSwitch (lower position) = 2, DuoSwitch (upper position) = 3, Eraser = 1