User`s manual

72
72
Index
Contents
IndexContents
ADVANCED OPTIONS
Click on the Wacom Tablet control panel OPTIONS... button to access the advanced OPTIONS dialog box.
The SIDE SWITCH MODE
changes the way you use the
pen when making right clicks or
other click functions. Select:
•H
OVER CLICK to perform
click functions without
touching the pen tip to the
tablet surface.
Hover click
Click tap
M
OUSE HANDEDNESS options change the button orientation on the Intuos4 Mouse and Lens Cursor for right- or left-
handed use.
Use the E
XPRESSKEY DISPLAY BRIGHTNESS options to set the brightness of the Touch Ring status LEDs and
ExpressKeys display on all connected Intuos4 tablets. When the slider is in the left-most position, the Touch Ring
status LED brightness is set to low, and the ExpressKeys display is off. See also optimizing the ExpressKeys display
.
Note: The pen tablet power saving mode will automatically change the brightness of the Touch Ring status LEDs and
ExpressKeys display as follows:
The P
RESSURE COMPATIBILITY check box should be checked if you are using graphics applications that only support a
maximum of 1024 levels of pressure (such as Adobe CS3, Corel® Painter 9, and other older applications). If not
checked, the pen will feel overly sensitive when using these older applications.
5 minutes no user input: Low brightness
10 minutes no user input: No illumination, ExpressKeys display
Low brightness, Touch Ring status LEDs
Active user input: Returns brightness to set level
•CLICK & TAP to enable the
precise placement of click
functions. When selected,
you must first press the side
switch then touch the pen
tip to the tablet surface in
order to perform the click
function.