User`s manual

Index

Contents

IndexContents

WORKING WITH AUTOCAD

AutoCAD can support the Intuos4 tablet as a Windows system pointing device or as a Wintab compatible

digitizer. By default, AutoCAD is configured to use Intuos4 as a system pointing device.

Follow the below procedures if you will be using Intuos4 with tablet menus or to digitize drawings to proper

scale.

Note: To configure the mouse or lens cursor for left-handed use in AutoCAD or similar applications, open the

Wacom Tablet control panel, click on O

PTIONS... and select LEFT in the MOUSE HANDEDNESS group.

Configuring AutoCAD for a Wintab compatible digitizer

Configuring tablet menus and screen pointing areas in AutoCAD

Calibrating Intuos4 for AutoCAD

CONFIGURING AUTOCAD FOR A WINTAB COMPATIBLE DIGITIZER

1. Start AutoCAD. Open the TOOLS menu and select OPTIONS. (In AutoCAD 2009 or later, click on the

button with the red ‘A’ on the top left and select O

PTIONS.)

2. From the O

PTIONS window, select the SYSTEM tab.

3. Under C

URRENT POINTING DEVICE, select the WINTAB COMPATIBLE DIGITIZER option.

4. Decide from which device AutoCAD will accept input. Choose an option from the A

CCEPT INPUT FROM

section:

• D

IGITIZER ONLY. The AutoCAD drawing editor only accepts input from Intuos4.

• D

IGITIZER AND MOUSE. The AutoCAD drawing editor accepts input from both Intuos4 and your

mouse.

5. Click OK to close the O

PTIONS window.