User's Manual

HAVING TROUBLE?
Page 117
Contents
Index
RESOLVING SOFTWARE CONFLICTS
If you are troubleshooting and found no problems with the tablet hardware, or if the WACOM TABLET icon
appears with a red X through it when starting your computer, follow the steps below to locate a possible
software conflict. (A red X through the W
ACOM TABLET icon means the Wacom tablet driver failed to load
properly.)
USING THE EXTENSIONS MANAGER
MANUALLY RESOLVING A CONFLICT
Using the Extensions Manager
If you are using Mac OS 7.5 or later and want to use the Extensions Manager to resolve a software
conflict:
1. Restart your computer with the S
HIFT key held down. When the system has fully booted, release the
S
HIFT key. Then from the Apple menu choose CONTROL PANELS and EXTENSIONS MANAGER.
2. From the S
ELECTED SET drop-down menu, select the SYSTEM 7.5.X extension set. For System 7.6 or
8.x, select the S
YSTEM BASE extension set.
3. Place a checkmark next to the W
ACOM TABLET driver in the list of CONTROL PANELS. You will be
prompted to create a duplicate set. Give the set a name, such as “test”. Then again select the W
ACOM
T
ABLET item and restart your computer.
4. If the system starts up successfully with the W
ACOM TABLET item active, open the Extensions Manager.
Turn on three of the disabled items and restart. Repeat this process until all items are on or until the
system crashes.