2

CUSTOMIZING
Page 88
Contents
Index
ADDING A NEW TOOL
When a new Intuos2 tool is placed on the tablet, it automatically appears in the TOOL LIST. However, the
Wacom control panel settings must be saved before the tool is permanently added to the list. Whenever a
new Intuos2 tool is added it always uses the default settings for that tool, and not the custom settings of
other tools, even if they are identical devices.
There are several ways to add Intuos2 tools to the T
OOL LIST:
• When you use an Intuos2 tool on the tablet for the first time, it will automatically function with the
appropriate default settings. You can customize the tool by opening the Wacom control panel and
changing the tab settings. Your changes are permanently saved when you close the control panel.
When you place a second Intuos2 tool on the tablet, a new tool discovered message box appears.
This reminds you to open the Wacom control panel to permanently add the new tool to the T
OOL LIST.
(This message only appears if the Wacom control panel is not open. If the control panel is open, the
tool is automatically added to the list.)
• To manually add a new tool, click on the A
DD TOOL TO LIST... button or select TOOL TO CUSTOMIZE...
from the A
DD pull-down menu. In the ADD TOOL TO CUSTOMIZE dialog box, select ADD NEW TOOL... and
follow the prompts.
When you select a new tool that you have added to the T
OOL LIST, the appropriate tab settings for that tool
are displayed. Any changes you may make to the tab settings will then apply to that tool.
To remove a tool from the T
OOL LIST, select CUSTOMIZED TOOL... from the REMOVE menu. In the dialog box
that appears, select the tool to remove. Then select R
EMOVE COMPLETELY and click OK.