Instructions / Assembly

Materials Needed:

1 - 16” Round Table Top (Waddell #2918P)

4 - 6” Traditional Table Legs (Waddell #2406)

4 - Straight Top Plates (Waddell #2751)

PLANT HOLDER

Tools Needed:

Drill

5/32” Drill Bit

Phillips Head Screwdriver

Step 1: Measure and pre-drill holes on the bottom of the Table Top for Straight Top

Plate installation. Be sure to place Straight Top Plate at least 1/4” in from edges.

Step 2: Use the provided screws to secure the Straight Top Plates to the bottom of the

Table Top surface.

Step 3: Attach the Traditional Table Legs by screwing the hanger bolts into each

Straight Top Plate.

Step 4: Apply desired nish to Plant Holder.

Visit www.waddellmfg.com “How to Videos” for video instruction

PAGE 1
PLANT HOLDER Materials Needed: Tools Needed: 1 - 16” Round Table Top (Waddell #2918P) Drill 4 - 6” Traditional Table Legs (Waddell #2406) 5/32” Drill Bit 4 - Straight Top Plates (Waddell #2751) Phillips Head Screwdriver Step 1: Measure and pre-drill holes on the bottom of the Table Top for Straight Top Plate installation. Be sure to place Straight Top Plate at least 1/4” in from edges. Step 2: Use the provided screws to secure the Straight Top Plates to the bottom of the Table Top surface.