Assembly Instruction

1.Use SCREW(10)to connect GLASS HOLDER(N)
with TOP BOARD(C),screw CAMBOLT(1)
onto TOP BOARD(C)and SIDE BOARD(B).
2.Install WOOD DOWEL(8)onto SIDE BOARD(B)
and screw LARGE CAMLOCK(2)onto SIDE BOARD(B).
3.Install screw LARGE CAMLOCK(2)
onto BASE AND MIDDLE SHELF(D).
4.Assemble BASE AND MIDDLE SHELF(D)with
SIDE BOARD(B),Tighten all screws.
5. Assemble TOP BOARD(C)with SIDE BOARD(B),
Tighten all screws.
STEP1:
1.Add SPRING WASHER(7)and SMALL WASHER(6)
onto LARGE ALLEN BOLT(3),then insert
CENTER SWIVEL PART(L)and CENTER SUPPORT METAL(K)
and CENTER SUPPORT WOOD(J)and LARGE WASHER(14)
onto LARGE ALLEN BOLT(3).
Then screw TOP GLASS SUPPORT BAR(I)onto
LARGE ALLEN BOLT(3).
STEP2:
PAGE 4 OF 6
ASSEMBLY INSTRUCTION
6. Nail FLOOR PROTECTOR(11)onto SIDE BOARD(B)
Set the finished product standing up.