Assembly Instruction

2. Add SMALL WASHER(6)and SPRING WASHER(7)
onto LARGE ALLEN BOLT(3),then screw it
together with TOP GLASS SUPPORT BAR(M)
and onto TOP BOARD(C).
3.Assemble TOP GLASS SUPPORT BAR(I)
using TOP GLASS SUPPORT LEG(M)
and SMALL ALLEN BOLT(13)with
TOP GLASS(A).
STEP3:
1.Place and PLASTIC WASHER(4)and
LARGE WASHER(14)hole of TOP BOARD(C).
Screw and install SMALL CAMLOCK(5)and WOOD DOWEL(8)onto
DRAWER SIDE PANEL(G).
1.Screw CAMBOLT(1)onto DRAWER FRONT PANEL(F),
2. Insert DRAWER BOTTOM PANEL(H)with DRAWER FRONT PANEL(F)and connect
DRAWER SIDE PANEL(G),then tighten all screws.
3.Insert DRAWER FRONT PANEL(F)with DRAWER BOTTOM PANEL(H),
then tighten all screws
STEP4:
PAGE 5 OF 6
ASSEMBLY INSTRUCTION