Assembly & Installation Instructions

A
B
C
A: 15-1/2”
B: 5-1/2”
C: 5-1/4”
Spare Parts List:
The following parts are available for re-order if damaged or missing.
Green Grounding
Screw (C)
Headless Screw (H)
Mounting Screw (B)
Wire Connector (E)
Lock Nut (D)
Cross Bar (A)
Ball Nut (F)
Rubber Pad (G)
Turn on the power at fuse or circuit box.
4. Pull out the outlet wires and house grounding wire from the outlet box. Make wire connections (E) using the
wire connectors (E):
---Connect the black wire from the fixture to the black wire from the power source.
---Connect the white wire from the fixture to the white wire from the power source.
---Attach the fixture grounding wire to the cross bar with the green grounding screw (C). Then connect it to the
house grounding wire with a wire connector (E).
Carefully put the wires back into the outlet box.
5. Attach the fixture to the cross bar (A) by inserting the headless screw (H), then secure it with two rubber pads (G)
and two ball nuts (F).
6. Loosen glass holder use ball nut, after change the glass, secure the glass holder by ball nut again.
Glass
Mounting Hardware
(1 SET)