Assembly & Installation Instructions

A: 18"

B: 6-1/2"

C: 6-1/4"

Spare Parts List:

Mounting Hardware

(1 SET)

Glass

The following parts are available for re-order if damaged or missing.

Turn on the power at fuse or circuit box.

4. Pull out the outlet wires and house grounding wire from the outlet box. Make wire connections (E) using the

wire connectors (E):

---Connect the black wire from the fixture to the black wire from the power source.

---Connect the white wire from the fixture to the white wire from the power source.

---Attach the fixture grounding wire to the cross bar with the green grounding screw (C). Then connect it to the

house grounding wire with a wire connector (E).

Carefully put the wires back into the outlet box.

5. Attach the fixture to the mounting plate (A) by inserting the headless screw (H), then secure it with two rubber pads (G)

and two ball nuts (F).

6. Attach the glass holder (I) to back plate, use ball nut-b (J) secure glass holder (I) to fix glass.

Green Grounding

Screw (C)

Headless screw (H) Glass Holder (I)

Ball Nut-b (J)

Mounting Screw (B)

Wire Connector (E)

Lock Nut (D)

Ball Nut (F)

Rubber Pad (G)

Mounting Plate (A)