Assembly Instructions

Step 4

Step 5

Stand the Barstool up and check for stability.

Then proceed to tighten all Bolts at all joints.

Note: DO NOT fully tighten a BOLT in one go and then move on to the next. Rather, in a

sequential manner, gradually tighten each Bolt until all bolts are evenly secured. This

methodology will ensure maximum evenness once all Bolts are fully tightened.

Your Barstool is ready for use.

This Barstool can only be used on a flat and level surface.

Attach the Left Armrest/Leg(B) to Seat(C) using Bolts(①) with Allen Key(③) as shown above.

Attach the Left Armrest/Leg(B) to Backrest(D) and Footrest(E) using Bolts(②) with Allen

Key(③).

Do not fully tighten the Bolts.

Page 4 OF 5