Caution : You must read this before you proceed Table Label Description QTY A Glass Top 1 B Leg 2 C Top Side Bar 2 D Footrest 2 Description QTY ① Bolt (M6*25MM) 9 ② Bolt (M6*20MM) 17 Label Picture Picture ③ Washer 17 ④ Allen Key 1 ⑤ Allen Key 1 Page 1 OF 5
Before Beginning Assembly: Overview Glass Top (A) Top Side Bar (C) Footrest (D) Leg (B) FRONT FACING This Table has multiple parts and may require up to 30 minutes to assemble. To give you an overview of the Table parts, the above picture is to help you put the various parts into perspective. Please read through the instructions below to familiarise yourself with the parts and steps before assembly.
Step 1 C Step 1.1 B C B Step 1.2 Open the carton and place all the parts onto a clean, non-marring surface. Place the Leg(B) with its inside facing up. Insert Top Side Bars(C) into Leg(B). 1.1) Attach the Top Side Bar(C) to Leg(B) using Bolts(②) and Washers(③) with Allen Key(⑤) as shown above. 1.2) Attach the Top Side Bar(C) to Leg(B) using Bolts(①) with Allen Key(④) as shown above. Do not fully tighten the Bolts. Step 2 D Step 2.2 B D Step 2.1 B Insert Footrests(D) into Leg(B). 2.
Step 3 D C B Attach Leg(B) to Top Side Bars(C) and Footrests(D) using Bolts( ②) and Washers(③) with Allen Key( ⑤) as shown above. Attach Leg(B) to Top Side Bars(C) and Footrests(D) using Bolts(①) with Allen Key(④) as shown above Do not fully tighten the Bolts. Step 4 Stand the Table up and check for stability. Then proceed to tighten all Bolts at all joints. Note: DO NOT fully tighten a BOLT in one go and then move on to the next.
Questions & Answers about Proposition 65 • What is Proposition 65? Proposition 65 requires businesses to provide warnings to Californians about significant exposures to chemicals that cause cancer, birth defects or other reproductive harm. These chemicals can be in the products that Californians purchase, in their homes or workplaces, or that are released into the environment.
