Owner Manual

PARTS INCLUDED INSTALLATION
TOOLS REQUIRED
SPECIFICATION
:100V - 265 VAC
:60Hz
:18W
:3000K
:1600Lm
Description Qty Part
Philips Screwdriver
Goggle
Ladder
Electrical
Tape
Dry & Damp
Unscrew the circle cross bar
mounting plate (AA) from both
sides of the lamp base. Set aside
both mounting screws (CC) for
later use.
Hold the re body. Connect the
black supply wire to the black
wire using a wire nut (DD). Connect
the white supply wire to the white
e wire using a wire nut (DD).
Circle Cross Bar Mounting Plate
1
Outlet Box Screw
2
BB
AA
Mounting Screw
2
Wire Nut
CC
DD
2
PLEASE TURN OFF / DISCONNECT ALL
NECESSARY ELECTRICITY PRIOR TO
THE INSTALLATION.
WARNING!
mounting screws.
circle cross bar mounting plate (AA).
plate (AA).
and the lamp base.
2.Unscrew the ground wire from
the circle cross bar mounting plate
(AA).