Assembly Instructions

Step 1
Step 2
(1.1) Place the Side Stretcher (C) and Side Stretcher (D) on the Back Frame
(A) as shown. Side Stretcher (C) has a small hole for identification.
(1.2) Then, fix the Side Stretcher (C) and (D) with JCBC Bolt ① + Spring
Washer + Flat Washer using Allen Key ②.
DO NOT FULLY TIGHTEN THE BOLT AND SCREWS.
(2.1 )Place the Side Rail (E) and Side Rail (F) on the Back Frame to. Side
Rail (E) has a small hole for identification.
(2.2) Then fix the Side Rail (E) and (F) with Screw ③ using Screwdriver (not
provided).
DO NOT FULLY TIGHTEN THE BOLT AND SCREWS.
(E) has a small hole for
identification.
(C) has a small hole for
identification.
(1.1)
(1.2)
(2.1)
(2.2)
Page 4 of 7