Assembly Instructions

Step 3
Step 4
Place the Front Leg (B) on the Side Stretcher and Side Rail as shown.
Then,(3.1) fix the Front Leg (B) on the Side Stretcher with JCBC Bolt ① +
Spring Washer + Flat Washer using Allen Key ②.
Then,(3.2) fix the Front Leg (B) on the Side Rail with Screw ③ using
Screwdriver (not provided).
DO NOT FULLY TIGHTEN THE BOLT AND SCREWS.
Place the Cushion Seat (G) on the table and put the chair on it as shown.
Then, fix the Cushion Seat (G) with L-Bracket ④ and Screw ③ using
Screwdriver (not provided).
DO NOT FULLY TIGHTEN THE BOLT AND SCREWS.
(3.1)
(3.2)
Page 5 of 7